Description

Ever been one channel short at the mixer with two more mics still needing a home? The ART ProMIX solves that exact problem by summing three microphone inputs into a single balanced output, effectively freeing up your board without touching a cable snake.

Each of the three channels gets its own level control, plus DIP-switch selectable phantom power and a low-frequency cut, so you can tailor gain staging and tone per mic before the signal ever reaches your main mixer. The combined signal exits via a balanced XLR line output ready to feed a standard mic input, while a separate Phone/Aux output lets you monitor directly through headphones or a powered speaker without pulling a feed from the main board.

Built for both studio and stage use, the ProMIX runs on either a 12V DC adapter or two 9V batteries, making it a practical grab-and-go solution for remote recording, houses of worship, conference rooms, or any setup where board real estate is tight.

Maximum Gain: +60dB
Input Impedance: 600 Ω
Maximum Input Level: -14dB
Maximum Output Level: +14dB
Output Impedance: 600 Ω
Total Harmonic Distortion: 0.0002
Low Cut: -3dB @ 100Hz
Clip Headroom: 3dB
Output Phantom Power: 12V DC
Power: 12V DC (adapter) / 2x 9V (batteries)
Dimensions: 5.625×3.75×1.75 inches (143×92×45mm)
Weight: 1.5lb (680g)