Description

The PRO35 is a compact cardioid condenser designed to clip directly onto instruments that are notoriously tricky to mic well — sax, brass, toms, and other percussion. Because it mounts inches from the source, it captures the natural tone and attack of the instrument while staying out of the performer’s way on stage.

Handles high-SPL sources cleanly, up to 145 dB SPL at 1 kHz (1% T.H.D.), so aggressive playing won’t distort the signal
Cardioid pickup pattern rejects sound from the sides and rear, keeping bleed from other instruments and stage noise to a minimum
50–15,000 Hz frequency response with an 80 Hz, 18 dB/octave low-frequency roll-off switch for tightening up boomy low end
AT8418 UniMount clip holds the mic securely in place, resists shock, and shields the capsule from knocks during active performances
Fixed-charge back plate (permanently polarized) condenser element runs on standard phantom power, 11–52V DC at roughly 2 mA
Terminates in a locking 4-pin connector sized for Audio-Technica UniPak body-pack wireless transmitters, with a 55″ (1.4 m) cable
Tiny footprint: the mic capsule itself is just 0.98″ long and 0.40″ in diameter, weighing 0.3 oz

Everything needed to get it mounted arrives in the box: the AT8418 UniMount instrument clip, the AT8538 power module, and a soft protective pouch for storage between gigs. Whether you’re wiring up a horn section or a drum kit, the PRO35 delivers consistent, isolated pickup without a bulky setup.